QMS 2060, Supplementary Manual

Page: 50 / 160

8VLQJD6HULDO
,QWHUIDFH
4063ULQW6\VWHP2SWLRQV
+RZWR&KRRVHD6HULDO&DEOH
If the printer is more than about 6.5 feet/2 meters from the PC, we
recommend using a serial cable for better communication. For best
results, the serial cable should be less than 25 feet/7.6 meters long.
0DNLQJWKH&RQQHFWLRQ
1 Caution: If you’re connecting the printer to a single PC via
the serial interface, turn off both systems first.
2 Serial cable
a Connect the serial cable (with the null modem adapter
attached) to the PC’s 9-pin or 25-pin male serial port.
b Connect the other end of the cable to the printer’s 9-pin
serial port (labeled “SERIAL”).
c Tighten the screws.
3 Turn on both the printer and the PC.
A start-up page should print and Serial RS-232C should be listed
with the interfaces. If it doesn’t, see the “Printer Problem Check-
list” section in chapter 6, “Troubleshooting,” of the
Operation
guide.
7R&RPSXWHU 7R3ULQWHU
SLQ
)HPDOH
SLQRU
SLQ