QMS 2060, Supplementary Manual

Page: 114 / 160

&RQILJXULQJ
&URZQ&RS\
4063ULQW6\VWHP2SWLRQV
%LQDU\$GMXVW7KUHVKROG
Menu Copier Menu/Copy Mode/Custom Config/Binary Adjust/
Threshold
Purpose Allows you to adjust the detection point for black vs. white in
Binary B/W mode.
Choices There are 15 levels of threshold available. Each level changes
the threshold slightly.
Notes Use the Previous key to move the message-window cursor
from the center (the default position) towards the left to a ‘D’
Darker (less bright) setting, or use the Next key to move the
cursor towards the right to a Lighter ‘L’ (brighter) setting.
Increasing the threshold makes light and dark areas in the
halftone appear lighter, while decreasing the threshold makes
light and dark areas appear darker.
Each increment of change is significant in output quality.
Therefore, we recommend that you change the setting by only
one level, print out a test copy, and then determine if further
modification to the contrast is necessary.