QMS 2060, Supplementary Manual

Page: 108 / 160

&RQILJXULQJ
&URZQ&RS\
4063ULQW6\VWHP2SWLRQV
0DNLQJ&KDQJHVWRWKH&URZQ&RS\0HQX
To access the Copier Menu, press the Copy key once. Then use the
Next or Previous key to scroll across the top level menus (Copy, Num-
ber of Copies, and Copy Mode). To enter a lower-level menu or select
a menu option, press the Select key. Use the Menu key to back out of
the menu and return to
IDLE
after you have made your selections or
after you have completed copying.
» Note: When you press the Copy key you gain access to the
CrownCopy menu and the copy option. To return the printer to normal
operation you must exit this menu by pressing the Menu key. Error
messages that normally occur (such as jams) will not appear on the
display until you exit the CrownCopy menu. Copy menu changes stay
in effect only for the next scan executed. The number of copies is
reset to 1 one minute after the last key press or after a print job is
complete.
0HQX6HWWLQJV
Copy options are accessed through the printer’s control panel. See
“The CrownCopy Menu” on page 5-28 for a diagram of the Copy
menu. See chapter 4, “Printer Configuration,” of the
Reference for
detailed configuration menu and control panel information.
V
Caution: Each configuration change you make affects the quality of
your printed output significantly. Therefore, we recommend changing
only one setting at a time, printing a test print, and then determining
if further configuration changes are necessary.