QMS 2060, Supplementary Manual

Page: 103 / 160

$XWRPDWLF
'RFXPHQW
)HHGHU$')
6FDQQLQJ
6WRUDJHDQG6FDQQLQJ'HYLFHV
8VLQJWKH$XWRPDWLF'RFXPHQW)HHGHU$')
The ADF can be loaded with up to 50 sheets of A4-, legal-, or let-
ter-size paper.
V
Caution: Do not feed any of the following through the ADF:
„
Paper with clips or staples
„
Paper with wet ink
„
Paper with folds, tears, notches, or curls
„
Paper with an inconsistent thickness, such as envelopes
„
Very thin paper
„
Paper not square or rectangular in shape
„
Paper smaller than A5 size or larger than A4 width
„
Tracing, coating, carbonless, or photographic paper
„
Items other than paper, such as transparencies, metal
sheets, or cloth
„
Important documents that cannot be damaged
1 If necessary, turn on the scanner and then the printer.
The power switch is located on the right side of the scanner.
2 Make sure that the scanner’s Power and Ready LEDs are
lighted and that no documents are on the scanner glass.
3 Raise the unattached end of the input paper chute to about
45 °.
4 Pull the metal bracket down from the under side of the paper
chute.
5 Slide the metal bracket into the grips on the document cover.
6 Pull up the input paper chute extension.
7 Angle the sheets of the document to be copied.
This helps guard against paper feed errors.
a Place the document face down.
b Lift approximately 0.25"/4 mm or less of the sheets with both
hands.