QMS 2060, Supplementary Manual

Page: 29 / 160

8SGDWLQJ
6\VWHP
6RIWZDUH
0HPRU\DQG6\VWHP6RIWZDUH
'RZQORDGLQJWKH6\VWHP6RIWZDUH
—
6HULDO
1 Connect the serial cable to the printer.
2 Download the DOS MODEX program available from the QMS
Bulletin Board.
Using your modem, dial the QMS Bulletin Board as described in
appendix A, “QMS Customer Support.” Access the QMS Main
Library through the
L
(Library of Files) selection, then do the fol-
lowing:
a Choose
D
...
Download a file
b Type
hibaud.exe
↵
c Exit the bulletin board
d Terminate the connection
3 Type
hibaud
↵
4 Set the PC’s baud rate to 38400 by typing the following:
modex.exe
↵
modex # 38400 n 8
↵
(where # is 1 to 4) See the MODEX.DOC file for more information
on this program.
5 Access the Administration/Communication/Serial menu and
set the Hardware Flow Control RTS and CTS values to On,
press the Online or Menu key and select yes to Save
Changes.
6 Access the Administration/Miscellaneous/New Flash Image
menu.
7 Select Yes in the New Flash Image menu.
The printer automatically reboots and waits for the new system
software (image) to be sent via your PC’s serial port (
YES
remains in the message window until the new image is sent).