QMS 2060, Supplementary Manual

Page: 42 / 160

8VLQJD
/RFDO7DON
,QWHUIDFH
4063ULQW6\VWHP2SWLRQV
4 Put terminating resistors in all open sockets in the connec-
tor boxes.
This ensures proper communication and helps speed up trans-
mission.
5 Turn on the printer.
A start-up page will print if it has not been disabled.
0DFLQWRVK3ULQWLQJ6RIWZDUH
If your Macintosh was previously connected to a PostScript printer,
you can probably start printing now with the printing software already
in place. Refer to your application documentation for instructions on
sending a document to the printer.
However, if you want to use all of your printer's special features (like
collation, 1200x1200 dpi printing), or if you've never printed to a Post-
Script printer before, you need to take a few minutes to make sure you
have the following printing software installed:
„
The QMS 2060 PPD file
„
Application-specific printer files
See the “Macintosh Printing Software” section of chapter 5, “Connect-
ing to a Macintosh” in the
Getting Started manual for details on install-
ing printing software.
7HVWLQJ0DFLQWRVK&RPPXQLFDWLRQ
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1 Display a disk or folder window.
2 Set up page information.
Choose Page Setup from the File menu. Select paper size, print-
ing orientation, and any other necessary options. Then select OK.