QMS 2060, Supplementary Manual

Page: 91 / 160

5HVWRULQJ'DWD
IURPD-D]RU
=LS'ULYH
6WRUDJHDQG6FDQQLQJ'HYLFHV
(UURU0HVVDJHV
The following error messages may appear while you are using the
Disk Operations menu:
5HVWRULQJ'DWDIURPD-D]RU
=LS'ULYH
Attach the Jaz or Zip drive from which you’ll be backing up data to the
printer’s SCSI port or SCSI chain. Then access the Administration/
Disk Operations menu, and then press the control panel keys in the
order shown in the following table. The printer responds by displaying
a status message in the message window (DSK refers to the device,
and
#
is the device number).
» Note: You may need to press the Next key one or more times to
advance through the list of selections or options.
Menu
(several
times) Exit from the configuration menu.
CONFIGURATION
ADMINISTRATION
Online Put the printer back on line.
IDLE
Message Meaning Action
WRITE PROTECT
The drive is write-
protected. Remove the drive’s write
protection.
Press this
key... to... and the message
window reads...
Next Advance to the Disk Operations/
Restore Disk menu
DISK OPERATIONS
RESTORE DISK
Select Access the Restore Disk/Dsk#: menu.
RESTORE DISK
DSK#x
Press this
key... to... and the message
window reads...