Qlogic SANbox 6142, User Manual

Page: 195 / 314

A – Command Reference
Localmap Command
FI0054601-00 A A-23
Q
Without FC Port Quer y
QRouter (admin) #> localmap add
The following wizard will query for attributes before persisting
and activating the updated mapping in the system configuration.
If you wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:06:01:60:b0:22:0c:d1,50:06:01:68:30:22:0c:d1
1 iqn.1991-05.com.microsoft:qlogic-09sd5i4l
Please select an Initiator from the list above ('q' to quit) : 1
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7
1 50:06:01:60:b0:22:0c:d1,50:06:01:68:30:22:0c:d1
2 20:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0
3 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab
Please select a Target from the list above ('q' to quit) : 3
iSCSI port used to access the Initiator (1=GE1, 2=GE2, ...) : 2
The selected initiator has not been presented on the port that
was selected to access the target. The following steps in the
wizard will now setup the initiator so that it is presented
on the port that will be used to access the target. A default
name for the presented initiator is assigned below. To accept
the default assigned name simply press the ENTER key or enter a
new name.
FC presented initiator WWPN [21:01:00:c0:dd:0c:8b:e2 ] :
The selected target has not been presented on the port that was
selected to be accessed the initiator. The following steps in the
wizard will now setup the target so that it is presented on the
port that will be used by the initiator. A default name for the
presented target is assigned below. To accept the default assigned
name simply press the ENTER key or enter a new name.
iSCSI presented target name [iqn.2004-08.com.qlogic:isr-6142.0608a00471.1.220000
2037fd8bab.2000002037fd8bab] :