Qlogic SANbox 6142, User Manual

Page: 222 / 314

A – Command Reference
Set Command
A-50 FI0054601-00 A
Q
A.25.6
Set Mgmt Command
Configures the router’s management port (10/100).
Authority
Admin session
Syntax
set mgmt
Examples
The following is an example of the Set Mgmt command:
QRouter (admin) #> set mgmt
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to the MGMT port.
Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp) [Dhcp ] 0
IP Address [10.0.0.1 ]
Subnet Mask [255.0.0.0 ]
Gateway [0.0.0.0 ]
All attribute values that have been changed will now be saved.