Qlogic SANbox 6142, User Manual

Page: 221 / 314

A – Command Reference
Set Command
FI0054601-00 A A-49
Q
A.25.5
Set iSNS Command
Configures iSNS parameters for an iSCSI port.
Authority
Admin session
Syntax
set isns [port_num]
Parameters
[port_num]
The number of the iSCSI port to be configured for iSNS.
Examples
The following is an example of the Set iSNS command:
QRouter (admin) #> set isns
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring iSNS iSCSI Port: 1
--------------------------------
iSNS (0=Enable, 1=Disable) [Disabled ] 0
IP Address [0.0.0.0 ] 10.0.0.3
TCP Port No. [3205 ]
All attribute values for Port 1 that have been changed will now be saved.
Configuring iSNS iSCSI Port: 2
--------------------------------
iSNS (0=Enable, 1=Disable) [Disabled ]
All attribute values for Port 2 that have been changed will now be saved.