Qlogic SANbox 6142, User Manual

Page: 167 / 314

7 – SANsurfer iSCSI/FC Router Manager
Wizards
FI0054601-00 A 7-97
Q
■
VLAN Priority : provides a dialog box that contains eight options for
the VLAN priority; 0 through 7. This dialog box is available only when
VLAN is enabled.
After setting the TCP/IP parameters, click Next to continue. Or click Cancel to
quit the wizard.
5. The FCIP Options dialog box requests entry of FCIP parameters (see
figure 7-91) .
Figure 7-91. FCIP Route Add Wizard—FCIP Options Dialog Box
You can configure the following parameters:
■
Error Detect Timeout : provides a dialog box that contains five options
for the error detect timeout; 1 to 5 seconds. The default is one second.
■
Resource Allocate Timeout : provides a dialog box that contains five
options for the resource allocate t timeout; 1 to 5 seconds. The default
is one second.
■
FCIP Timestamp : provides a dialog box for enabling and disabling
FCIP timestamps. The default is enabled.
■
FCIP SW Compression : provides a dialog box for enabling and
disabling FCIP compression. The default is disabled.