Qlogic SANbox 6142, User Manual

Page: 37 / 314

2 – General Description
Ethernet Port—Management
FI0054601-00 A 2-11
Q
2.10
iSCSI/Gigabit Ethernet Port LEDs
The iSCSI/gigabit Ethernet ports shown in Figure 2-7 are RJ-45 connectors that
provide connection to an Ethernet SAN through a 10/100/1000 Base-T Ethernet
cable. The ports are labeled
GE1 and GE2 .
These ports have two LEDs: the link status LED (green) and the activity LED (also
green).
■
The link status LED lights continuously when an Ethernet connection has been
established.
■
The activity LED lights when data is being transmitted or received over the
connection.
Figure 2-7. Gigabit Ethernet (iSCSI) Ports
2.11
Ethernet Port—Management
The management Ethernet port shown in Figure 2-8 is an RJ-45 connector that
provides a connection to a management workstation through a 10/100 Base-T
Ethernet cable. The port is labeled
MGMT .
Figure 2-8. Ethernet Management Port
You can use a Windows
®
, Solaris™, or Linux™ workstation to configure and
manage the router over an Ethernet connection using SANsurfer Router Manager,
CLI, or simple network management protocol (SNMP).