Qlogic SANbox 6142, User Manual

Page: 163 / 314

7 – SANsurfer iSCSI/FC Router Manager
Wizards
FI0054601-00 A 7-93
Q
7.6.11
FCIP Route Add
The FCIP Route Add Wizard provides step-by-step instructions for adding an FCIP
route.
Perform the following steps to add an FCIP route:
1. When the FCIP Route Add Wizard launches, it displays a warning (see
figure 7-87) cautioning that the operation about to be performed will change
the operation of the selected GE and FC ports. If the selected ports are being
used in FC or iSCSI mappings, the connectivity will be lost. Also connectivity
on the GE port
not selected for the FCIP route will be momentarily disrupted.
Read the warning. If you want to proceed, click Yes and continue with step 2.
Otherwise, click No to cancel the wizard.
Figure 7-87. FCIP Route Add Wizard—Warning Dialog Box
2. The FC and GigE Port Selection dialog box requests the selection of a
FC-GigE port pair (see figure 7-88) . The router port pair you selected are the
ports used for the FCIP route.