Qlogic SANbox 6142, User Manual

Page: 85 / 314

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
FI0054601-00 A 7-15
Q
❑
System Description : text that describes the location of the router.
❑
Read Community : a password that authorizes an SNMP management server
to read information from the router. This is a write-only field. The value on the
router and the SNMP management server must be the same. The read
community password can be up to 32 characters
excluding #, semicolon (;),
and comma (,). The default is public .
❑
Trap Community : a password that authorizes an SNMP management server
to receive traps. This is a write-only field. The value on the router and the
SNMP management server must be the same. The trap community password
can be up to 32 characters
excluding the number sign (#), semicolon (;), and
comma (,). The default is public .
❑
System Location : specifies the name of the router location. The name can
be up to 64 characters excluding the number sign (#), semicolon (;), and
comma (,).
❑
System Contact : specifies the name of the person to be contacted to respond
to trap events. The name can be up to 64 characters excluding the number
sign (#), semicolon (;), and comma (,).
❑
Authentication Traps : Enables or disables the generation of authentication
traps in response to authentication failures.
■
SNMP Trap Receivers
❑
Enabled : a checkbox to enable the trap receiver specified by the IP address,
trap port, and trap version.
❑
IP Address : the IP address to which the SNMP traps are sent. A maximum
of eight trap addresses are supported.
❑
Trap Port : the port number on which the trap is sent. The default is 162.
❑
Trap Version : specifies the SNMP version (1 or 2) with which to format traps.