Qlogic SANbox 6142, User Manual

Page: 267 / 314

B – Log Messages
Informational Log Messages
FI0054601-00 A B-3
Q
B.2.2
iSCSI Driver
The following informational log messages are common to both iSCSI ports: 1 (GE1)
and 2 (GE2). The messages are listed in
table B-2 and described following the table.
Log messages beginning with #0 denote iSCSI port 1 (GE1) and log messages
beginning with #1 denote iSCSI port 2 (GE2).
B.2.3
Fibre Channel Driver
The following informational log messages are common to both Fibre Channel ports:
1 (FC1) and 2 (FC2). The messages are listed in
table B-3 and described following
1692 Event notification; iSCSI connection opened.
1693 Event notification; connection opened with iSNS server.
1695 Event notification; iSNS SCN received.
1697 Event notification; iSNS client discovered.
1699 iSCSI close connection request received
1700 iSCSI connection closed
1715 Remote system connection established using DDB d:d
1738 Re-enabling compression
2051 TRB freed, State xx, Abort Reason d, Flags xx
Table B-2. iSCSI Driver—Informational Log Messages
ID Log Message No.
86343 #%d: QLPortUp: Set link configuration 0x%x 327
86347 #%d: QLDisable: Restart RISC 331
86349 #%d: QLEnable: Restart RISC to update EEPROM 333
86352 #%d: QLPortDown: Set link configuration 0x%x 336
86874 #%d: QLIsrDecodeMailbox: Link up 858
327 iSCSI port enabled, port up
331 Restart iSCSI processor (RISC)
333 EEPROM updated, restart iSCSI processor (RISC)
336 iSCSI port disabled, port down
858 Link up reported by iSCSI processor for GE1 or GE 2