Qlogic SANbox 6142, User Manual

Page: 113 / 314

7 – SANsurfer iSCSI/FC Router Manager
Wizards
FI0054601-00 A 7-43
Q
■
Map Local Initiator/Target Wizard : launches the Map Local wizard, which
allows you to map a local initiator to a local target. For more information, see
section 7.6.4 .
■
Unmap Local Initiator/Target Wizard : launches the Unmap Local wizard, which
allows you to delete a local initiator to a local-target mapping. For more
information, see
section 7.6.5 .
■
Add Remote Router Wizard : launches the Add Remote Router wizard, which
allows you to assign a remote router to your local router as a peer. For more
information, see
section 7.6.6 .
■
Remove Remote Router Wizard : launches the Remove Remote Router wizard,
which allows you to remove a local-to-remote router peer assignment. For more
information, see
section 7.6.7 .
■
Map Remote Initiator/Target Wizard : launches the Map Remote wizard, which
allows you to map an initiator to a target device one of which is on a remoter
router. For more information, see
section 7.6.8 .
■
Unmap Remote Initiator/Target Wizard : launches the Unmap Remote wizard,
which allows you to delete an initiator-to-target device mapping. For more
information, see
section 7.6.9 .
■
Discover iSCSI Target : launches the Discover iSCSI Target wizard, which
allows you to specify the IP address of the iSCSI Target to be discovered. The
target is added to the discovered targets list.
See section 7.6.10 .
■
FCIP Route Add : launches the FCIP Route Add wizard, which allows you to
select the resources used for the route: the IP address of the remote FCIP peer,
IP parameters, VLAN support, compression and bandwidth limit.
See
section 7.6.11 .
■
FCIP Route Remove : launches the FCIP Route Remove wizard, which allows
you to remove an existing FCIP Route, freeing the resources (FC and GE ports)
used by the route.
See section 7.6.12 .