Qlogic SANbox 6142, User Manual

Page: 291 / 314

C – Configuring CHAP
Configuring CHAP Using CLI
FI0054601-00 A C-3
Q
10. Click OK .
11. Click OK , and the initiator should complete discovery.
C.2.3
CLI—Normal Session—Bi-directional CHAP
The following procedure describes the steps for configuring bi-directional CHAP
used during a normal session:
1. On the router
a. Enable CHAP on the presented target to which the initiator will login.
b. Create a secret (for example, secret_target )
c. Use Set CHAP
2. Use Initiator add to add the initiator that is about to do a normal login.
a. Enable the CHAP for this initiator
b. Create a secret (for example, secret_initiator) .
c. Use Set Chap to update the CHAP settings of the initiator.
3. Go to the MS Initiator and perform the following steps:
a. Click General .
b. Click Secret (in the middle of the screen).
c. If this is the first time you are setting secrets, reset all the secrets.
d. Type the secret ( secret_target ) that you created in step 1 .
4. Click Targets .
5. Select the target you want to login to.
6. Click Advanced .
7. Select Chap Login Information .
8. Type the secret (secret_initiator ) that you created in step 2 into Target Secret .
9. Select Mutual Authentication .
10. Click OK.
11. Click OK . The initiator completes the normal login.