Qlogic SANbox 6142, User Manual

Page: 294 / 314

C – Configuring CHAP
Configuring CHAP Using the GUI
C-6 FI0054601-00 A
Q
5. Create a CHAP secret (for example, secret_initiator ).
6. Go to the MS Initiator and perform the following steps:
a. Click Discovery .
b. Click Add .
c. Enter the address of the iSCSI port of the bridge.
d. Click Advanced .
e. Click Chap Login Information .
f. Type the secret ( secret_initiator ) you created in step 5 into Target Secret .
7. Click OK .
8. Click OK . The initiator completes discovery.
C.3.3
GUI—Normal Session—Bi-directional CHAP
Perform the following steps to program bi-directional CHAP during a normal session:
1. On the bridge, enable CHAP for the iSCSI presented target.
2. Select the presented target on the left column of the GUI.
3. Click Information .
4. Select Enable Chap .
5. Type a secret in the Chap secret dialog box (for example, secret_target ).
6. Is the initiator on the discovered iSCSI initiators list?
a. If the initiator is not part of the discovered iSCSI initiators list, then go to the
wizard menu and select Add Initiator Wizard .
b. If the initiator is part of the discovered list, then go to step 10 .
7. Fill in the IQN name string.
8. Select Enable Chap .
9. Create a CHAP secret (for example, secret_initiator ).
10. Go to the MS Initiator and perform the following steps:
a. Click General .
b. Click Secret (in the middle of the screen).
c. If this is the first time you are setting secrets, reset all the secrets.
d. Type the secret ( secret_target ) that you created in step 5 .
11. Click Targets .