Qlogic SANbox 6142, User Manual

Page: 18 / 314

1 – Introduction
Laser Safety Information
1-4 FI0054601-00 A
Q
1.4.4
VCCI Class A Statement
This is a Class A product based on the standard of the Voluntary Control Council
For Inference by Information Technology Equipment (VCCI). If this equipment is
used in a domestic environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.
1.5
Laser Safety Information
This product uses Class 1 laser optical transceivers to communicate over the fiber
optic conductors. The U.S. Department of Health and Human Services (DHHS)
does not consider Class 1 lasers to be hazardous. The International Electrotechnical
Commission (IEC) 825 Laser Safety Standard requires labeling in English, German,
Finnish, and French stating that the product uses Class 1 lasers. Because it is
impractical to label the transceivers, the following label is provided in this manual.
The following warning applies to XPAK optical transceivers:
WARNING!! LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
1.6
Electrostatic Discharge Sensitivity (ESDS) Precautions
The assemblies used in the router chassis are ESD sensitive. Observe ESD
handling procedures when handling any assembly used in the router chassis.
1.7
Accessible Parts
The following field replaceable units (FRUs) are supported by the SANbox 6142
router:
■
Small form-factor pluggable (SFP) optical transceivers
1.8
General Public License
QLogic SANbox routers are powered by the Linux operating system. A
machine-readable copy of the Linux source code is available upon written request
to the following address. A nominal fee will be charged for reproduction, shipping,
and handling costs in accordance with the General Public License.