Qlogic SANbox 6142, User Manual

Page: 263 / 314

A – Command Reference
Target Command
FI0054601-00 A A-91
Q
A.27
Target Command
Removes targets from the router’s database. This command is typically used to
remove targets from the database that are no longer connected to the router. The
target add command is not currently supported.
Authority
Admin session
Syntax
target
add
rm
Keywords
add
Not supported
rm
Remove a target from the router’s target database.
Examples
The following is an example of the Target add command:
QRouter (admin) #> target add
Command 'target add' is currently not supported.
Examples
The following is an example of the Target rm (remove) command:
QRouter (admin) #> target rm
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b6:1f:fa
Please select an 'OFFLINE' Target from the list above ('q' to quit): q
Command aborted.