Qlogic SANbox 6142, User Manual

Page: 275 / 314

B – Log Messages
Error Log Messages
FI0054601-00 A B-11
Q
43299 QLUT_DeallocateFcipDataBuffer: Null portal object in map table 2339
43300 QLUT_CreateFcipDataBufferpool: Allocation of 32K buffers from
LargeBufferPool failed 2340
43521 QLSC_BreakupVUIOAllocPhase: TPB allocation failed 2561
43522 QLSC_BreakupVUIOAllocPhase: Data buffer and TPB allocation
failed 2562
7 NULL doorbell routine for unloaded drivers. When a driver is unloaded, the
doorbell routine is redirected to this NULL routine.
36 Processing unsupported ordered tag task management command
44 Processing unsupported head-of-queue task management command
98 Unable to create an object for the target device; exceeded the maximum
number of target devices
100 Unable to create an object for the target node; exceeded the maximum number
of target devices
107 Memory unavailable for LUN object
117 Unable to create an object for initiator object; exceeded the maximum number
of initiators
136 Process control block status indicates that a PCI error occurred during a target
operation
146 Process control block status indicates that a DMA error occurred during an
initiator operation
147 Process control block status indicates that a transport error (protocol) occurred
during an initiator operation
151 Process control block status indicates that a data overrun error occurred during
an initiator operation
274 iSCSI login failed between receipt of PDU and request for the data segment.
278 iSCSI login failed due to unsupported version number in received login PDU.
297 iSCSI Login PDU contains invalid initiator name. The format and character set
used to form the initiator name is invalid.
305 iSCSI target login was attempted to a portal (iSCSI1 or iSCSI2) on which the
target is not presented.
307 iSCSI Login PDU received for a target with a target name unknown to the
router.
308 iSCSI Login PDU received without a target name for a normal session.
310 iSCSI Login PDU received without an initiator name key/value.
Table B-8. Application Module—Error Log Messages (Continued)
ID Log Message No.