Qlogic SANbox 6142, User Manual

Page: 185 / 314

A – Command Reference
FRU Command
FI0054601-00 A A-13
Q
A.10
FRU Command
The FRU command saves and restores the router’s configuration.
Authority
Admin session to restore.
Syntax
fru
restore
save
Keywords
restore
The FRU restore command requires that you first ftp the tar file containing the
desired configuration to the router. When this command is issued, you are
prompted for the restore level. You can fully restore the router’s configuration (all
configuration parameters and LUN mappings) or restore only the LUN mappings.
The restored configuration will not take effect until the router is rebooted.
save
The FRU save command creates a tar file containing the router’s persistent data,
configuration, and LUN mappings. The file is stored in the router’s /var/ftp
directory. You must then ftp the tar file from the router.
Examples
The following is an example of the FRU restore command:
QRouter (admin) #> fru restore
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take effect.
Examples
The following is an example of the FRU save command:
QRouter (admin) #> fru save
FRU save completed. Configuration File is QLogic_Router_FRU.bin
Please use FTP to extract the file out from the System.