Qlogic SANbox 6142, User Manual

Page: 79 / 314

7 – SANsurfer iSCSI/FC Router Manager
Action Menu
FI0054601-00 A 7-9
Q
■
Add Remote Router Wizard : launches the Add Remote Router wizard, which
allows you to assign local router to a remote router as peers. (see section 7.6.6) .
■
Remove Remote Router Wizard : launches the Remove Remote Router wizard,
which allows you to remove a local-to-remote router peer assignment. (see
section 7.6.7) .
■
Map Remote Initiator/Target Wizard : launches the Map Remote wizard, which
allows you to map an initiator to a target device, one of which is on a remoter
router.
(see section 7.6.8) .
■
Unmap Remote Initiator/Target Wizard : launches the Unmap Remote wizard,
which allows you to delete an initiator-to-target device mapping. (see
section 7.6.9) .
■
Discover iSCSI Target : launches the Discover iSCSI Target wizard, which
allows you to specify the IP address of the iSCSI Target to be discovered. The
target is added to the discovered targets list.
(see section 7.6.10)
■
FCIP Route Add : launches the FCIP Route Add wizard, which allows you to
select: the resources used for the route, the IP address of the remote FCIP peer,
IP parameters, VLAN support, compression and bandwidth limit.
(see
section 7.6.11)
■
FCIP Route Remove : launches the FCIP Route Remove wizard, which allows
you to remove an existing FCIP Route freeing the resources (FC and GE ports)
used by the route.
(see section 7.6.12)
■
FW Update Wizard : launches a wizard for updating the router’s firmware (see
section 7.6.3) .
■
Add Initiator Wizard : launches a wizard for entering an iSCSI initiator into the
system database (see section 7.6.2) .
■
Remove Initiator : removes the selected iSCSI initiator. This option is available
only when an initiator is selected (highlighted) in the system tree.
■
Remove Offline Target : removes the selected offline Fibre Channel target. This
option is available only when an offline FC target is selected (highlighted) in the
system tree.
■
Beacon ON : turns on the SANbox 6142 router beacon to locate the router
quickly.
■
Beacon OFF : turns off the SANbox 6142 router beacon.