background image

PDOC-00176-01

Our social responsibility includes conducting business in a manner that minimizes our ecological impact on the 

environment and reducing waste in our supply chain. To that end, the Quick Start Guide and Safety Manual are available 

at www.arista.com.

Getting Started

Instructions on getting started with your new access point, including installation and initial configuration instructions, 

are available at 

                                                              

http://www.arista.com/en/support/product-documentation

 

Other documents available at this location include:

You can access Arista documentation at 

                                                              

https://www.arista.com/en/support

Documents available at this location include:

•   Wireless Manager Appliance Quick Start Guide

•   Safety and Compliance Guide

•   WiFi Regulatory Compliance Statements

•   User Manual

You may also download current software, as well as view FAQs, Warranty Information, Knowledge Base articles, Security

Advisories, Software Licenses, and Field Notices at 

https://www.arista.com/en/support

Receiving and Inspecting the Equipment

Upon receiving the access point, inspect the shipping boxes and record any external damage. Retain the packing 

materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them.

If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any accessories that 

may be packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with your purchase order.

Obtaining Technical Assistance

Customers, partners, resellers, or distributors holding a valid Arista Service Contract can obtain technical support 

through these sources:

      

Email:

 

[email protected]

. This is the easiest way to create a new service request.

                   Include a detailed description of the problem and the output of “show tech-support”.

 

      

Web:

 

www.arista.com/en/support

.

                A support case may be created through the support portal on our website.

5453 Great America Parkway

Santa Clara, CA 95054

USA

408 547-5500

www.arista.com

Arista, Mojo, the Arista logo, and the Mojo logo are trademarks or registered trademarks of 

Arista Networks, Inc. and Mojo Networks, LLC. in the U.S. and other countries.

© 2020 Arista Networks, Inc. www.arista.com

Headquarters

408 547-5500

www.arista.com

Support

408 547-5502

866 476-0000

[email protected]

Sales

408 547-5501

866 497-0000

[email protected]

00176-01

Summary of Contents for AP-C230E

Page 1: ...mage Retain the packing materials if you suspect that part of the shipment is damaged the carrier may need to inspect them If the boxes were not damaged in transit unpack them carefully Ensure that you do not discard any accessories that may be packaged in the same box as the main unit Inspect the packing list and confirm that you received all listed items Compare the packing list with your purcha...

Page 2: ... bracket to T Grid 2 Rotate bracket to snap on to T Grid 3 Place the first mounting post on the rear side of the device on to the lower notch of the bracket 5 Ensure that all the mounting posts on the rear side of the device are snapped in to the respective notches on the bracket 4 Rotate the device such that the center mounting post fits in to the center notch on the bracket 15 16 24mm Mounting B...

Page 3: ... release key screw with a tamper resistant T10 torx screwdriver to lock AP to the bracket 5 Once attached push in the release key to lock the hooks and make sure all hooks are locked in place Note If needed the wall mounting accessory SKU MNT AP FLAT 14CM can be ordered and purchased separately External Antennas Connect dual band antennas to the left and right ports marked 2 4 5 and 5 GHz antennas...

Page 4: ...describes the states of the Power LED Reduced capability indicates that the AP is getting less than the required maximum power from the PoE switch i e 802 3af instead of 802 3at LAN1 LED ON when the interface is up LAN2 LED ON when the interface is up and either wired guest or link aggregation is configured Radio LEDs ON when the corresponding radio is operational Step 2 Connect to the network If ...

Reviews: