Qiagen QIAsymphony SP, Operating Manual

Page: 184 / 216

QIAsymphony SP/AS Consolidated Operating Guide 12/2017 184
4. Open the Maintenance SP menu and run the service protocol Open magnetic head guards .
CAUTION
Damage to the instrument(s)
Make sure to install the magnetic-head guards before operating the
QIAsymphony SP.
14.3.3 Regular maintenance procedure for the QIAsymphony AS
1. Remove the assay run by pressing the Remove button.
2. Remove assays from the “Assays” drawer. If desired, transfer assays directly to the PCR cycler.
3. Optional : Download the result file and, if available, the cycler file. Ensure that these files have
been backed up.
4. Remove used sample tubes/plates from the “Eluate and Reagents” drawer. Either store safely
or discard according to your local safety regulations.
5. Remove reagent tubes and bottles from the “Eluate and Reagents” drawer and discard
according to your local safety regulations.
6. Discard empty tip racks.
7. Replace the tip disposal bag before starting the next assay run.
8. Perform UV decontamination of the worktable (optional).
Important
Do not refill used tip racks.
Important
When using the QIAsymphony Cabinet AS, check if the tip disposal bag is full.
The waste bin should be emptied to avoid contamination inside the cabinet.
For detailed information, refer to the QIAsymphony Cabinet SP/AS User Guide .
14.4 Daily maintenance (SP/AS)
After performing the last run of the day, perform the regular maintenance procedure and, in
addition, the daily maintenance procedure.
Important
Before running a service protocol from the Maintenance menu, ensure that the
QIAsymphony SP/AS hoods are closed.
Important
Pay attention to the safety information.