Qiagen QIAsymphony SP, Operating Manual

Page: 16 / 216

QIAsymphony SP/AS Consolidated Operating Guide 12/2017 16
When working with the QIAsymphony SP/AS instruments:

The line power cord must be connected to a line power outlet that has a protective conductor
(earth/ground).

Do not adjust or replace internal parts of the instruments.

Do not operate the instruments with any covers or parts removed.

If liquid has spilled inside the instruments, switch off the instruments, disconnect them from the
power outlet, and contact QIAGEN Technical Services.

The instrument shall be installed in a way that the power cord is accessible.
If the QIAsymphony SP/AS instruments become electrically unsafe, prevent other personnel from
operating them, and contact QIAGEN Technical Services.
The instruments may be electrically unsafe when:

The QIAsymphony SP/AS or the line power cord appears to be damaged.

The QIAsymphony SP/AS has been stored under unfavorable conditions for a prolonged
period.

The QIAsymphony SP/AS has been subjected to severe transport stresses.

Liquids have come into direct contact with electrical components of the QIAsymphony SP/AS.

The power cord has been exchanged with a non-official power cord.
2.3 Environment
2.3.1 Operating conditions
WARNING
Explosive atmosphere
The QIAsymphony SP/AS is not designed for use in an explosive atmosphere.
WARNING
Risk of overheating
To ensure proper ventilation, maintain a minimum clearance of 5 cm (1.97 in.) at the
rear of the QIAsymphony SP/AS.
Slits and openings that ensure the ventilation of the QIAsymphony SP/AS must
not be covered.