QIAsymphony SP/AS Consolidated Operating Guide 12/2017
124
To switch cooling on, follow the steps below.
1.
Press the snowflake button to the left of the cooling position to be switched on.
Cooling for that position will be switched on, and the slot will appear black.
2.
To switch cooling off again, press the snowflake button to the left of the cooling position to be
switched off.
The snowflake button will appear gray.
Important
When a Rotor-Disc is assigned as an assay rack, slots 4–6 are covered with the
Rotor-Disc Adapter Base Unit QS. Therefore only one snowflake button is
necessary and visible for slots 4–6.
Important
If a rack is loaded, cooling cannot be switched off.
12.3.4
Starting an integrated run
1.
Press
Run
in the
Integrated Run
screen.
2.
The status of an integrated run can be viewed in the
Integrated Run View
screen.
Summary of Contents for QIAsymphony SP
Page 213: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 213 This page intentionally left blank...
Page 214: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 214 This page intentionally left blank...
Page 216: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 216 www qiagen com...
