QIAsymphony SP/AS Consolidated Operating Guide 12/2017
107
Favorite assays
First, you need to set up a list of
Favorite
assays (see Section 12.2.1) and then follow the steps
below.
1.
Select the desired SP batch(es).
2.
Select the desired
Favorite
assay.
Assigning assays using the Assay Assignment screen
1.
Select the SP batch.
2.
Press
Define Assays
in the
Integrated Setup
screen.
3.
The
Assay Assignment
screen appears. Here, assays can be assigned to
specific sample positions.
4.
Select the sample positions to which the assay should be assigned.
These will be shown in light blue before selection and darker blue after
selection.
5.
Alternatively, select all the samples by pressing
Select All
.
6.
Select the desired assay from the
Assays
list.
The selected assays will be assigned to the selected positions. A number
will appear in the bottom right corner of the assigned sample positions.
This number indicates the number of assays that have been assigned to a
particular sample.
7.
If there is more than one assay to be assigned, repeat steps 4 and 5 for all assays.
For each assigned assay, there is a separate tab. When an assay tab is selected, all samples
with this assigned assay are colored green and have the same assay-specific number in the
bottom left corner of the sample position.
Summary of Contents for QIAsymphony SP
Page 213: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 213 This page intentionally left blank...
Page 214: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 214 This page intentionally left blank...
Page 216: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 216 www qiagen com...
