Qiagen QIAsymphony SP, Operating Manual

Page: 141 / 216

QIAsymphony SP/AS Consolidated Operating Guide 12/2017 141
If No was selected for Assign each assay individually? in the Assay Selection screen, it is not
possible to select individual assays. A single tab, All Assays is automatically selected
2. Select the sample positions to which the Assay Parameter Set(s) should be
assigned, and press
Assign .
The selected Assay Parameter Set(s) will be assigned to the selected positions. A number will
appear in the bottom right corner of the assigned sample positions. This number indicates the
number of Assay Parameter Sets that have been assigned to a particular sample.
Important
The Queue button becomes active when at least one sample is assigned to every
assay and when at least one sample is assigned to each slot.
12.4.5 Modifying assay parameters
The assigned Assay Parameter Set defines the default parameters for a run. To change the assay
parameter(s), proceed as follows:
1. Press Specifications .
The Assay Specifications screen will appear.
2. Select the tab for the Assay Parameter Set. The
Assay Parameter Set
list will be displayed.