Pioneer passport DCT Service Manual Download

Page: 148 / 156

140

Passport DCT Customer Service Guide

........................................................................................

Setting Up Your VCR Controls

If the recording started, you receive another message indicating that your setup is now
complete.

Press the EXIT button to exit the Settings menu.

Note: In the event that Passport DCT is unable to complete the setup of the VCR, you will see a message.

Starting Your VCR on Impulse

• Be sure that your VCR is turned on.

• Be sure that there is a recordable blank tape in your VCR. If you are reusing a tape, be sure that

the record tabs have not been removed.

• You must have completed the previous procedure and your VCR must have been setup.

• Make sure that a scheduled timer has not been set for the same time that you want to impulse

record. If so, you are not able to record; the scheduled timers and PPV purchases always take
precedence over an impulse recording.

Starting your VCR

Using your settop remote, press the REC button to start recording. Make sure that the remote
is set for CABLE.

• If you have setup your VCR Controller, the following display appears.

Summary of Contents for passport DCT





























































































































































Search results

Summary of Contents for passport DCT

Reviews:

Related manuals for passport DCT

Brands by name

Popular brands

Pioneer passport DCT, Service Manual

Search results

Summary of Contents for passport DCT

Reviews:

Related manuals for passport DCT

Brands by name

Popular brands