- 70 -
5
：
Communication settings
6
：
MIN(AI1
，
AI2)
7
：
MAX(AI1
，
AI2)
P2-10
Speed setting mode of torque upper limit
digital setting
Factory default
150.0%
Set range
0.0%
～
200.0%
P2-11
Speed control mode Torque upper limit
command channel selection (power
generation)
Factory default
0
Set range
0
：
P2-10 1
：
AI1 2
：
AI2 3
：
AI3
4:
High
speed
pulse
input
setting(S5)
5
：
Communication settings
6
：
MIN(AI1
，
AI2)
7
：
MAX(AI1
，
AI2)
8
：
Function code P2-12 setting
P2-12
Speed control mode Torque upper limit
Digital setting (power generation)
Factory default
150.0%
Set range
0.0%
～
200.0%
In the speed control mode, the maximum value of the inverter output torque is controlled
by the torque upper limit source.
P2-09 is used to select the set value of the upper limit of the torque, when the analog, high-
speed pulse, communication settings corresponding to the set.
100% corresponds to P2-10, and P2-10 100% of the inverter rated current.
AI1, AI2, AI3 settings see P4 group AI curve related introduction (by P4-33 select the
respective curve)
High speed pulse see P4-28 ~ P4-32 introduction
Select the communication settings, if the current point-to-point communication from the
machine and receive data as a torque given, the direct transmission by the host torque
digital settings, see A8 group point-to-point communication description; otherwise, by the
host computer through the communication address 0 × 1000 write -100.00% to 100.00%
of the data, of which 100.00% corresponds to P2-10.
P2-13
Excitation
adjustment
proportional gain
Factory default
2000
Set range
0
～
20000
P2-14
Excitation
adjustment integral
gain
Factory default
1300
Set range
0
～
20000
