Panasonic KX-TVP150E Overview Download

Page: 423 / 849

M-7-2

Troubleshooting

Manager’s Guide

7.1

Troubleshooting Guide

• Change the printed circuit board.
• If the phone works properly when SLT

is connected instead of the VPS,
change the CO card. If the phone still
fails to work properly, check the
connection between the VPS and PBX.

• Insert the card firmly into the normal

card slot.

• Insert the card firmly into the back

board.

• Press the Reset Button.

• Change to a tone phone.

• Adjust to the transfer sequence of the

connected PBX and reset.

• Adjust to the hooking time of the

connected PBX and reset.

• Adjust to the CPC signal of the

connected PBX and reset.

• Reset the outside call dial mode (tone/

pulse) properly.

• Reset the outside line access sequence

of the connected PBX.

• Adjust to the number of digits in the

mail box number.

• Readjust to the number of digits in the

mail box number.

• Connect the connected cable properly.
• Adjust the terminal parameter to the

VPS parameter. If the terminal still
fails to operate properly, set to the
desired parameter from the terminal.

• Readjust the busy signal reconnection

procedure to the con-nected PBX.

• Readjust the no-response reconnection

procedure to the connected PBX.

• Bad printed circuit board.
• Bad connection with PBX.
• Card was inserted into the

wrong slot.

• Incomplete card insertion.

• A pulse phone is being used

by mistake.

• Improper setting of the

transfer sequence.

• Improper setting of the

hooking time.

• Improper setting of the CPC

signal.

• Improper setting of the

outside call dial mode.

• Improper setting of the

outside call dial procedure.

• Improper setting of the

number of digits in the
extension number.

• Improper setting of the

number of digits in the
mailbox number.

• Improper connection.
• Improper setting of the

parameter.

• Improper setting of the busy

signal reconnection procedure.

• Improper setting of the no-

response reconnection
procedure.

The VPS does not operate.

• Poor resetting.

• Dialing does not register.

• The line is disconnected

during the transferring of an
outside call.

• Outside calls cannot be

transferred.

• Unable to make outside

calls.

• Unable to call an extension.

• Unable to access the mail

box.

• Connected terminal (RS-

232C port) does not operate.

• Unable to make reconnection

when the line is busy.

• Unable to make a no-

response reconnection.

PROBLEM

PROBABLE CAUSE

POSSIBLE SOLUTION

Summary of Contents for KX-TVP150E


















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands

Panasonic KX-TVP150E, Overview

Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands