Panasonic KX-TVP150E Overview Download

Page: 366 / 849

M-5-38

Message Manager

Manager’s Guide

5.5

Modifying Voice Prompts

You will hear the prompt:

Current prompt is ...

Review the current prompt.

You will hear the prompt:

To change this prompt, press [1].

Otherwise, press [2].

Note:

If you have not recorded any voice prompts for this number,
you will review the original system prompt and go to the
recording prompt menu in step 9.

Press [1] to change the prompt.

You will hear the prompt:

To record a new prompt, press [1].

To erase the current prompt and back to the original
system prompt, press [2].

Press [1] to record a new prompt.

Note:

You can delete the current prompt and restore the system
prompt by pressing [2].

You will hear the prompt:

Please state the prompt at the tone.

To end recording, press [1].

To pause and restart recording, press [2].

State a prompt.

Press [1] to end recording.

Summary of Contents for KX-TVP150E


















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands

Panasonic KX-TVP150E, Overview

Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands