Panasonic KX-TVP150E Overview Download Page 420

Page: 420 / 849

Manager’s Guide

Bulletin Manager

M-6-19

Press [1] to create bulletin board messages (Level 4).

You will hear the prompt:

This is the top menu.

The message is ---.

To edit the bulletin message, press [#].

To select a bulletin message for level 1, enter a number
[1] through [9].

Select a bulletin message for level 4 as in the operation at
previous levels.

The bulletin message number is ---.

There is no bulletin message recorded or destination
assigned.

Note:

If the message for this level already exists, you can go
directly to step 10.

To record a message, press [1].

Otherwise, press [2].

Press [1] to record a message.

Record a message. (See 6.3.1 Recording Messages.)

Then you will hear the prompt:

To assign an extension, press [1].

Otherwise, press [2].

Press [2] to proceed to the next step.

(Example)

6.2

Creating a Bulletin Board Message

Summary of Contents for KX-TVP150E


















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands

Panasonic KX-TVP150E, Overview

Search results

Summary of Contents for KX-TVP150E

Reviews:

Related manuals for KX-TVP150E

Brands by name

Popular brands