Panasonic KX-TVP150E Overview Download Page 659

Page: 659 / 849

Work Sheets

W-1-7

1.3

How to Use the Work Sheets

5. Custom

Service
Settings

1. Mailbox

Assignments

2. System Ser-

vice Report

3. Call Account

Report

4. Port Usage

Report

5. Port Usage

Statistics
Clear

6. Disk Usage

Report

7. Disk Usage

Statistics
Clear

8. Mailbox

Usage Report

9. Mailbox

Usage Statis-
tics Clear

Description, Menu Repeat Cycle Call Transfer
Anytime, Wait for Second digit, NO DTMF Input
operation, keypad Assignment.

Select Service (1-16)

Mailbox No., Ext., Owner’s name, COS No., Message retention time, capacity, length,
authorization status.

Hard disk drive No., Outcalling & Daymode/Nightmode services for each port.

Mailbox No., Date & time, Call duration, Destination telephone No.

Port No., No. of external delivery, Message waiting notification, No. of incoming
calls.

Capacity of hard disk drive, No. of messages.

Mailbox No., New/Saved/External delivery/Guest messages, Usage of authorized
features.

ONLN, OFLN, PASS, TIME, BREP, PSET, ELOG, SAVE, LOAD, GPRN, HELP, VERS.

Mailbox No. length, First digit of ext., System Manager’s mailbox No., Message Manager’s mailbox
No., Bulletin Manager’s mailbox No.

2. System

Reports

3. Utility Com-

mands

4. System

Reset/Clear

Summary of Contents for KX-TVP150E


















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP150E

Reviews:

Panasonic KX-TVP150E, Overview, Page: 659 / 849

Search results

Summary of Contents for KX-TVP150E

Reviews: