Panasonic KX-TVP150E, Overview

Page: 548 / 849

U-3-8 Subscriber’s Guide
3.1 Recording to Deliver a Message
3.1.4. Adding a Message
If you realize that you want to say more, you may want to
change the message. It is not necessary to make a new one.
If the message has not been accepted yet, you can add a
message at the end of the message you have just recorded.
Note: If a message has already been accepted, the sender cannot
add a message.
To add a message:
After recording, you will hear the prompt:
To review, press [1].
To accept, press [2].
To record a new one, press [3].
To add, press [4].
To erase and exit, press [ ].
1
Press [4] to add a message.
You will hear the prompt:
Please leave me a message at the tone.
To end recording, hang up or press [1] for more features.
To pause and restart recording, press [2].
2
State an additional message.
You will hear the prompt:
3
Press [2] if it is acceptable.
3.1.5. Pausing Recording
When you are recording a message, you might want to stop
for a while and think about what you will say. If you want
to stop recording, use the pause feature.