Panasonic KX-TVP150E, Overview

Page: 400 / 849

M-5-72
Message Manager
Manager’s Guide
5.9 Setting Message Waiting
Notification
9
Enter the telephone number to be called.
You will hear the prompt:
This telephone number is ——.
To change the telephone number, press [1].
To accept, press [2].
To review, press [3].
To add more digits to the telephone number, press [4].
To insert a pause, press [5].
To set dial mode, press [6].
To insert a wait for dial tone, press [7].
10
Press [2] to accept the number.
5.9.5 Specifying the Notification Method
By choosing the notification by a direct call the Message
Manager can specify a telephone or a pocket beeper as the
destination for notification calls. If the destination is a
telephone, the VPS will call, play a message stating that
there are messages waiting, prompt the Message Manager
to enter his or her password and, once the password has
been entered correctly, play the messages in the mailbox.
If the destination is a pocket beeper, the VPS will call and
terminate processing. However, if the Message Manager
has not retrieved his or her messages within 30 minutes, the
system would call the beeper once again. This process is
repeated seven times or until the messages are retrieved.
To specify the notification
method:
1 — 9
Same as Setting the Telephone Number to be Called.
10
Press [2] to accept the number.