otometrics AURICAL Aud Reference Manual Download Page 91

Page: 91 / 136

Note

•

Sound-field testing is not available on some models.

Insert earphones

•

Plug the insert earphones into the Right and Left

Insert

sockets.

•

If you are using a mono insert earphone, plug it into the

Left Insert

socket (the lower socket).

Headphones - air conduction

•

Plug standard headphone cables (red and blue jacks) into the Right and Left

Headphone

sockets.

Patient Responder

•

If you are using a Patient Responder, plug it into this socket.

Bone oscillator

•

Connection for a standard Bone Oscillator for Mastoid or Forehead placement.

Speaker, Analog (line output)

•

Connection for a sound field speaker with external amplifier. (Not active on some models.)

Line-in

•

Connection for a line-in device (e.g. CD player).

Caution

•

When you connect other electrical equipment to AURICAL Aud, remember that equipment that does not

comply with the same safety standards as AURICAL Aud can lead to a general reduction in the system's safety
level.

Operator monitor headset - headphones

•

If you are using headphones with the operator monitor headset, plug the headphones into this socket.

The jack is marked with this symbol.

Operator monitor headset - boom microphone

•

If you are using a boom microphone with the operator monitor headset, plug the boom microphone on the monitor
headset into this socket.

The jack is marked with this symbol.

Counseling and Simulations headphones

•

Connection for Counseling and Simulations headphones.

Talk-back microphone

•

Connection for an operator desktop microphone.

Otometrics - AURICAL Aud

5 Unpacking and Installing

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands