otometrics AURICAL Aud Reference Manual Download Page 43

Page: 43 / 136

CD material

You can use any type of CD sound recordings of your choice.

•

Select

Int. CD

in the

Control Panel

, and browse to the drive you wish to use.

These files are shown as CD track numbers in the

File/track/list selection

drop-down list.

Line In

When

Line In

is selected, only the

Counter

of the

Player Panel

is activated.

2.9.3

Scoring words using integrated OTOsuite Speech Material

The Speech Player Panel

Word score counter buttons:
Correct (+)
Incorrect (-)

Play/Pause

Stop

Reset word score

Previous/next list

File/track/list selection

Setting up for Scoring and Playing

To set up for scoring and playing, see

Selecting word or phoneme scoring

►

The Stimulus bar - word score

Scoring Panel

The score percentage and the

Correct

Incorrect

scores relating to the number of words played are shown at the top

of the screen.

When you use integrated word lists, the Scoring Panel is either initialized to "0% 0/0" or to “100% 0/0”, depending on
the setting in

Tools

Options

Audiometry

Speech

View

Score Presentation

•

Click on the relevant Word score counter button to record the response of the client.

Otometrics - AURICAL Aud

2 Navigating in the OTOsuite Audiometry Module

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands