otometrics AURICAL Aud Reference Manual Download Page 65

Page: 65 / 136

2. Slide the probe cable into place so it fits snugly

in the cable holder on an Ambient Noise
Assessor clip. Repeat with another clip for the
second probe.

3. Place FreeFit on the patient's shoulders. Clip

the probes to the FreeFit collar.

–

Position the probes so that they are above
the patient's shoulders.

4. Adjust each probe carefully:

–

The reference microphone should face the
ceiling.

A. Reference

microphone

–

Ensure that the probe housing does not
touch the patient's clothing and that the
microphone is not covered by anything,
such as clothing or hair.

5. Open the audiometry control panel.

If the

Ambient Noise Assessor

is not already open, click the button on the Audiometry toolbar.

6. Press the power button on FreeFit. If FreeFit does not connect, ensure that your FreeFit has been selected in the

PMM configuration wizard. Also check the battery status of FreeFit. (See Charging, Powering and Connection Status in
the reference manual for FreeFit.)

The

Ambient Noise Assessor

dialog indicates the status of the noise level:

Ambient Noise Status

The measured ambient noise level is below the maximum permissible level for the stim-
ulus that is currently selected.

Otometrics - AURICAL Aud

2 Navigating in the OTOsuite Audiometry Module

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands