otometrics AURICAL Aud, Reference Manual

Page: 53 / 136

Example
The adaptive Speech legend showing the current measurement settings. Data has not been stored at this point.
The adaptive Speech legend showing the three first measurements followed by a blank row with the current measurement
settings ready to be stored.
Pinned rows
You can pin a row to make it available in advance in order to reflect the measurements usually performed in your clinic. A
legend with pinned rows will always look the same when you start testing a new patient.
This customized layout provides you with a consistent work environment and makes it easy to see what to do next, or if
any test has been deliberately left out.
A test that is not pinned to the legend is added automatically below the pinned rows.
Click 'n' Get
The Click 'n' Get feature allows you to perform a test from the predefined legend simply by clicking the
Apply Settings
arrow button in the second column of the legend. Click 'n' Get loads all the relevant settings including the integrated
speech files.
Pinning a test
You can pin one test per measurement condition.
Note
•
You can pin a test to the legend, if you have not already pinned an identical test. To edit a pinned test,
make sure that User Tests are not write protected in the Configuration Wizard.
To pin a row, simply select the row, right-click and select Pinned Tests > Pin Test . Here you can also rearrange pinned
rows by moving them up or down in the legend.
Modifying Click 'n' Get for a pinned test
You can assign a different speech stimulus and/or transducer to a pinned test. This will load the desired word list, trans-
ducer, etc., when you use the Click 'n' Get feature.
Otometrics - AURICAL Aud 53
2 Navigating in the OTOsuite Audiometry Module