otometrics AURICAL Aud Reference Manual Download Page 82

Page: 82 / 136

4.3

Testing with sound files

4.3.1

Playing sound files without word lists

Prepare playback

1. Use either

Int. CD

Int. File

Sound Source

2. If

Int. CD

is chosen, select

CD Drive Selection

and/or

CD Track Selection

in the

Options

dialog or directly in the

Player Panel

. This will list CD tracks in the

Player Panel

combo box.

3. If

Int. File

is chosen, select

Sound File Selection

in the

Options

dialog or browse for a folder containing sound files in

the

Player Panel

. This will list all sound files contained in the same folder as the

Sound File Selection

file in the

Player Panel

combo box.

How to play back / stop playback

1. Use either the

Play

Pause

button.

2. A click on the

Pause

button (actually a stop icon) will pause playing (this is different when using word lists).

3. A click on

Reset

stops the playback and resets the score.

How to score

•

Use the score buttons or shortcut keys (+, -).

When to reset score

Notice the field

Reset Score Counter

in the

Options

dialog.

•

Reset Score Counter

True

The

Scoring panel

is reset if you change

Channel Settings

(except

Continuous On

), the

Intensity

or if the

Reset

but-

ton is clicked.

•

Reset Score Counter

False

Does not change the score even if

Reset

is clicked.

4.3.2

Playing sound files with word lists

Prepare playing

1. Use either

Int. CD

Int. File

Sound Source

2. If

Int. CD

is chosen, select a CD drive in

CD Drive Selection

in the

Options

dialog or in the

Player Panel

. It is import-

ant that an XML file (extension *.wordlistdefinition) describing the word lists exist on your PC (in the installation
folder). If not the tracks on the CD will be listed and not the actual words.

3. If

Int. File

is chosen, select a .wav file in the

Sound File Selection

which is located in the same folder as a word-

listdefinition file. You can also browse for a folder in the

Player Panel

that contains a wordlistdefinition.

How to play/stop files

1. Use either the

Play

Pause

button.

2. A double click on a word in the

Word list control

plays the selected word.

3. A

Play

button click will start to play back the word list from the current index to the end.

4. If you like to change index during playback, just change index in the

Word list control

and it will keep on playing from

that position.

Otometrics - AURICAL Aud

4 Examples of audiometric testing

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands