otometrics AURICAL Aud Reference Manual Download Page 96

Page: 96 / 136

Guides for inserting cable strips

Cable guides

Opening for fitting cables through

1. Remove the cover on the AURICAL speaker unit and connect the short connection cables between the AURICAL

speaker unit and AURICAL Aud as described in

Connecting cables to the AURICAL speaker unit

►

2. When you connect AURICAL Aud to the AURICAL speaker unit, gently press the cables into the cable guides on the

front of the speaker.

You can insert cable strips in the cable strip guides in order to hold the cables in place.

5.8.1

Connecting cables to the AURICAL speaker unit

Connecting cables

1. Fit the cables through the opening in the AURICAL

speaker unit below the speaker.

2. When you have connected all the cables to the

AURICAL speaker unit, place the speaker cover on
the speaker.

The installation must be carried out in accordance with IEC 60601-1-1 plus addendum in the form of Part 1:
General provisions -1 and UL 60601-1, CAN/CSA-C22.2 NO 601.1-90. The supplementary provisions on the reli-
ability of electro-medical systems.

It is a general rule for all electrical equipment used in the proximity of the client that:

•

The connected equipment must comply with IEC 60601-1 and/or IEC 60601-1-1

except for the PC, and equipment connected to the line in and the line out sockets of AURICAL Aud.

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands