otometrics AURICAL Aud Reference Manual Download Page 25

Page: 25 / 136

2.6

The stimulus bar

Intensity

Stimulus indicator

Transducer indicator

Stimulus being presented

Frequency

Stimulus bar color

Routing indicator

Masking on

Intensity

Indicated by the dB level above the channel status bars.
•

Masking is denoted by square brackets around the level (calibrated in effective masking level).

•

The green triple wave symbol above the level indicates that the stimulus is currently being presented.

Stimulus bar color

Indicates the routing for each channel:
•

Blue = left ear

•

Red = right ear

•

Blue/Red = binaural

•

Gray = unspecified

Stimulus, transducer and routing indicators

The stimulus/masking type, the transducer and the routing for each channel.

2.6.1

Test controls

Test controls provide a means of operating the audiometer if you use the mouse and on-screen options to perform tests.

•

To enable test controls, select

Tools

Options

Audiometry

General

On-screen controls

Show

Otometrics - AURICAL Aud

2 Navigating in the OTOsuite Audiometry Module

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands