otometrics AURICAL Aud, Reference Manual

Page: 30 / 136

Viewing masking levels
Masking levels
Below the audiogram, the intensity levels used for masking can be displayed. It is an option to display the masking
levels. Select
Tools
>
Options
>
Tone
>
View
>
Misc.
>
Masking Levels
.
• In combined view, the non-test ear masking levels are shown below the graph.
• In Dual Graph View , the masking level used for masking the non-test ear is by default displayed under the graph
for the test ear. The masking level can be set to be displayed either under the test ear or under the non-test ear:
select
Tools > Options > Tone > View > Misc > Masking Table Placement .
2.7.3 Curves and symbols selection
You can select a symbol and/or a curve style for a specific measurement and you can create new symbols.
2.7.3.1 Selecting a symbol or curve
You can select a symbol and/or a curve style for a specific measurement.
1. Select
Tools
>
Curves and Symbols
...
2. Click on the selections that apply to your measurement under
Test
,
Transducer
, and
Aided Condition
. The current
symbols and line style are shown.
3. Double-click on the symbol you wish to change. The
Symbols
selection dialog box is shown.
4. Double-click on the symbol you wish to use.
5. To change the line style of the curve, select from the
Line Style
drop-down list.
6. To change the color, double-click on the current
Color
square. Select a new color or click on
Define custom colors>>
to select a color not shown. Click
OK
.
7. To optimize viewing of the audiogram, you can offset the symbols in relation to the audiogram grid in the fields
Hori-
zontal Offset
and
Vertical Offset
.
30 Otometrics - AURICAL Aud
2 Navigating in the OTOsuite Audiometry Module