otometrics AURICAL Aud Reference Manual Download Page 97

Page: 97 / 136

Connecting the speaker connection cable to AURICAL Aud

1. Plug the speaker connection cable into this socket.

2. Fit the cable in the left-most cable guide on the

right side of the speaker.

3. Plug the other end of the connection cable from

the AURICAL speaker unit into the no. 3 speaker
socket on the AURICAL Aud connection panel.

24V DC external power supply cable

1. Plug the external power supply cable into this

socket.

2. Fit the cable in the center cable guide on the right

side of the speaker.

3. When you have completed connecting the cables,

plug the external power supply cable into the
mains outlet.

Connecting the 24V DC power supply cable to AURICAL Aud

1. Plug the power supply cable between the speaker

and AURICAL Aud into this socket.

2. Fit the cable in the right-most cable guide on the

right side of the speaker.

3. Plug the other end of the power supply cable into

the 24V DC socket on the AURICAL Aud con-
nection panel.

Otometrics - AURICAL Aud

5 Unpacking and Installing

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands