otometrics AURICAL Aud Reference Manual Download Page 48

Page: 48 / 136

The Speech Player Panel

Phoneme score counter buttons:
No correct phonemes (0)
1 phoneme correct (1)
2 phonemes correct (2)
All 3 phonemes correct (3)

Play/Pause

Stop

Reset Counter scoring and Player

Previous/next list

File/track/list selection
(disabled when Line In is selected)

In the Speech Player Panel example shown above, the

Number of phonemes

setting in the

Scoring and Playing

dialog

box is set to

Setting up for Scoring and Playing

To set up for scoring and playing, see

Selecting word or phoneme scoring

►

The Stimulus bar - phoneme score

Scoring Panel

The score percentage and the number of words played are shown at the top of the screen.

The Scoring Panel is either initialized to "0% 0 words" or to “100% 0 words”, depending on the setting in

Tools

Options

Audiometry

Speech

View

Score Presentation

•

Click on the relevant phoneme score counter button to record the response of the client.

Store the phoneme score results

See

Selecting the work area in the Speech screen

►

2.9.7

Saving source levels for speech material

Note

•

This feature applies to sound files on the PC hard drive except for the integrated OTOsuite Speech Mater-

ial.

If you have a folder on the PC containing WAVE (.wav) files, eg. from a CD, you can calibrate these files by adjusting the

Source A

and

Source B

levels in the

Monitor and Level

section of the control panel. The next time you browse to this

folder (or create a user test) the

Source A

and

Source B

level settings will automatically be set to the saved level.

Otometrics - AURICAL Aud

2 Navigating in the OTOsuite Audiometry Module

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands