OTARI RADAR II, Operation Manual, Page: 98 / 261

In this example, you would set Tracks Per Disk” to 4, then map the SCSI IDs so
that six disks are used.
4.3.5 RADARLink Enable/Disable
Please Note: RADARLINK is described in Appendix D of this manual.
This menu item is provided to enable RADARLINK operation, permitting multiple
slaved RADAR II systems to be controlled from one location. Upon selecting this
item, the menu will prompt you with:
If you select YES, the system will prompt you with:
The FIRST RADAR II system you place into RADARLINK mode will appear as
Master; others will use their ID’s as selected in the Preferences Menu (§4.3.4.14).
To disable RADARLINK re-select the RADARLINK item, and select Cancel.
4.3.6 RADARLINK SOLO Mode Selection
This menu provides the ability to place an individual RADAR II system into “solo”
mode, which enables the Master controller to control just that system. If selected,
the system will respond with:
Use the cursor up/down keys or the RE-8’s jog wheel to scroll through the available
RADARLINKed systems; press ENTER to select the desired system to SOLO.
To exit from this mode, re-selct the RADARLINK SOLO item to disable it.
R A D A R I I M E N U O P E R A T I O N 4-13
Edition 1