OTARI RADAR II, Operation Manual, Page: 184 / 261

4. The LCD will ask you which tracks you want to LOOP:
Use the cursor keys to select ALL (loops ALL tracks between Mark
In/Out points), or TRACK ARM (loops only those track(s) selected
using the Track Arm buttons.) Press ENTER to continue.
5. (If you selected TRACK ARM:) Select the track(s) you require using the
Track Arming buttonS. Press ENTER to continue.
6. Press ENTER. The LCD asks if you want to Insert or Overwrite at the
LOOP TO location:
Press ENTER if you wish to accept the Insert default. If you want the
loop(s) to overwrite at the new location, cursor to Overwrite, then
press ENTER.
The system will respond with:
7. Enter the number of LOOPs desired using the Jog Wheel, Transport or
the Numeric Keypad. Press ENTER.
The system will loop the material
the selected number of times. No audio has been placed on the Clipboard
during this edit.
Un-Do will, however, restore the audio to its original
location.
Please Note: You may enter a Negative Loop count - this will loop the marked segment the
entered number of times, ENDING at the current Time Code location.
Edition 1
7-24 S E C T I O N 7