OTARI RADAR II, Operation Manual, Page: 79 / 261

3. Select the location point you want to edit by number (using the Numeric
keys) or, in the case of the Mark In/Mark Out keys, simply press the
desired mark key.
4. Use the cursor left/right keys to move among the fields - you may use the
cursor up/down keys to make changes, or use the numeric keypad to
enter numbers, or, use the Jog Wheel to change the numbers.
5. To assign or edit the name of the location (in EDIT or NEW only), press
Cursor Right until the cursor is to the right of the LOCATION number.
This places the cursor beneath the first letter of the name. Use the
QWERTY keyboard to type or edit the nine character name.
Please Note:
The Jog Wheel may be used to enter non-alphabet characters.
In the DELETE dialog, you may change only the location number to be
deleted.
Use the cursor up/down keys or the Jog wheel to do this.
6. SWAP Only. The SWAP function provides a different screen when
selected:
Use the cursor up/down keys to select the point(s) to be swapped– these
include any numbered autolocator points, plus the Mark In and Mark Out
points. Use the cursor left/right keys to move between rows on the LCD
display.
7. Press ENTER to complete the EDIT, DELETE, NEW, or SWAP
operation and return to the initial EDIT LOC dialog.
or...
Press EDIT LOC again to return to Ready mode or choose one of the
EDIT, NEW or DELETE options.
R E C O R D I N G & T R A N S P O R T O P E R A T I O N 3-23
Edition 1